Dynatrol® CL-10GH Liquid Level Sensor

The Dynatrol® CL-10GH Liquid Level Sensor is designed for high, intermediate or low-point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level sensors.

Key Features

  • Versatile: This level sensor operates in liquid materials with a variety of densities
  • No Adjustments Needed: Long operating life with no required field adjustments
  • Simple Design: No seals or gaskets to deteriorate or fail
  • Simple Installation: 3/4-inch male NPT connection at the point of level detection.
  • Material: Custom 450 Premium Stainless Steel
  • Options – The Dynatrol DJ Level Sensors can be modified for special level detection applications:
  • High Temperature Series rated to 500°F
  • Air Purge Cooling System rated to 750°F
  • Media-specific special coatings
  • Cryogenic temperatures
  • NEMA 4X corrosion protection
  • Clean-in-place connections
  • Sealed and suspended units for hanging at heights
With the CL-10GH reliable operation can be achieved in problem applications where other types of controls may fail to operate at all. Let Dynatrol provide a worry‐free solution for you today!
DOWNLOAD BROCHURE
CL-10GH Level Sensor

CL-10GH Standard Specifications

  • Explosion Proof: CSA NRTL/C approved for Class I, Group D, Division 1; Class II, Groups E, F and G
  • Temperature Rating: 300°F (consult factory for higher ratings)
  • Pressure Rating: 3000 PSIG @ 100°F (consult factory for higher ratings)
  • Pressure Connection: 3/4-inch NPT
  • Conduit Connection: 1/2-inch NPT
  • Process Contact Surfaces: 316 Stainless Steel (standard)

EC-501A(G) Control Unit Specifications

  • Used with the Dynatrol G-Series Level Sensors for exceptional sensitivity in measurement
  • Explosion Proof: CSA NRTL/C approved for Class I, Group D; Class II, Groups E, F and G; Class III
  • Voltage Supply (nominal): 120 VAC: 50 – 60Hz
  • Power Consumption: 5 VA
  • Temperature Rating: 125°F Maximum
  • Contacts: SPDT 2A @ 120 VAC (non-inductive)
  • 240V Also Available

501A(G), socket, and housing sold separately

Request For Quote

Ready to get started? Contact us today to request a personalized quote and learn how our products can meet your specific needs.

REQUEST FOR QUOTE

How it Works

The Dynatrol GH Liquid Level Sensor consists of a paddle-style probe that is installed through the wall of the vessel or piping at the point of desired level detection. When the probe is uncovered, the paddle is free to vibrate and produce an output signal. This signal operates a relay indicating the paddle is uncovered and a low level exists. When the paddle is submerged, a dampening of the oscillation occurs. The resultant loss of signal de-energizes the relay indicating that a high level exists.

The Dynatrol GH Liquid Level Sensor is powered by an EC‐501A(G) Control Unit, which is required for its designed operation. The ON/OFF signal from the Dynatrol level sensor operates a SPDT relay in the EC-501A(G) Control Unit. The contacts of this relay can be used to actuate alarms, indicator lights or process control equipment.

The EC-501A(G) Control Unit performs frequency and voltage analysis to actuate switching at the desired point level of detection. This technology has been added to the level control in order to reduce false tripping and make level measurements more dependable. This combination of level sensor design and unique electronics makes our level sensor system both reliable and rugged.

Optional NEMA 4X Assembly

Key Advantages

  • Each Dynatrol® level sensor can be configured for NEMA 4X-rated environments.
  • Epoxy-coated NEMA 4X grade devices can be fit with common clean-in-place (CIP) flange connections.
  • Dynatrol® NEMA 4X assemblies are constructed from corrosion-resistant materials, including custom 450 stainless steel, epoxy coatings and other specialty materials.
  • The Dynatrol® NEMA 4X assembly is available for all Dynatrol® level sensor models, including sealed and suspended configurations.
  • No field adjustment is needed for any of these devices as all level sensor and control unit components have been optimized for a long operating life.
Optional NEMA 4X Level Sensor Assembly Configuration

Optional Sealed and Suspended Assembly

Key Advantages

  • The Sealed and Suspended Dynatrol® Detector is designed for high point level detection of bulk solids.
  • For problem applications, such as those associated with angle-of-repose, this configuration provides reliable operation in hard-to-reach locations.
  • Excellent option when wall mounting isn’t practical
  • Customizable to ANY length
  • Available in all sensor models

Request For Quote

Ready to get started? Contact us today to request a personalized quote and learn how our products can meet your specific needs.

REQUEST FOR QUOTE
Optional Sealed and Suspended Level Sensor Configuration
Since 1956 Dynatrol

Take your peace of mind to the next level

Learn why thousands of companies have trusted Dynatrol for their most critical level detection and density measurements – all over the world across a variety of industries. Let’s start the conversation today.

Contact