Dynatrol^® GSS Level Sensor Switch for Bulk Solids

The Dynatrol^® GSS Level Detector is designed for application to either high, intermediate, or low-point level detection of bulk solids

The GSS Level Detector is constructed to handle extremely light weight applications that are difficult to measure or detect a reading. Reliable operation can be achieved with this control where other types of controls may fail to operate.

Versatile:
This level detector operates successfully with consistent results on difficult product applications such as fine, low density powders and materials as light as ½ lb. per cubic foot.

No Adjustment Required:
All level switch components have been constructed for long operating life and require no field adjustments.

Simple Installation:
Simple installation is made in the tank side through a 3/4" half-coupling at the point of desired level detection.

Principle of Operation:
The Dynatrol GSS level detector consists of a paddle style probe which is installed thorough the wall of the bin or duct at the point of desired level detection. When the probe is uncovered the paddle is free to vibrate and produce an output signal. This signal operates a relay indicating the paddle is uncovered and a low level exists. When the paddle is covered a dampening of the oscillation occurs. The resultant loss of signal de-energizes the relay indicating that a high level exists.