Dynatrol Products - Level Detection, Viscosity & Density Measurement

Main » Liquid Level Switch » Product Details
  

Dynatrol® CL-10RH Liquid Level Switch


The Dynatrol® Type CL-10RH Liquid Level Detector and EC-102B or EC-103C Control Unit is used for high, intermediate or low point level detection of liquids and slurries. This is typically a replacement unit for existing CL-10RH units in the field. The CL-10GH is phasing out the older style liquid level detector.





Dynatrol® CL-10RH Liquid Level Switch


Information

The CL-10RH Liquid Level Switch is being phased out and replaced by the newer CL-10GH type level detector.  


CL-10RH Specifications

 •  Explosion Proof: CSA NRTL/C approved for Class 1, Group D, Division 1 Class 2, Groups E, F, and G
 •  Pressure Rating: 3000 PSIG @ 100°F
 •  Temperature Rating: 300°F (High Temperature Construction Available)
 •  Pressure Connection: ¾-inch NPT
 •  Conduit Connection: ½-inch NPT
 •  Process Contact Surfaces: 316 S.S. (standard)


EC-102B Control Unit

 •  Explosion Proof: CSA NRTL/C approved for Class 1, Group D, Division 1, Class 2, Groups E, F, and G
 •  Voltage Supply (Nominal):120 volts, 60Hz

 •  Temperature Rating: 125°F Maximum
 •  Power Consumption: 5 VA

 •  Conduit Connections: ½-inch
 •  Contacts: SPDT 2A @ 120 VAC (Non-Inductive)


Principle of Operation

The Dynatrol® liquid level paddle is driven into vibration by a driver coil. A second coil produces a voltage proportional to a 0-3/4-inch range of level. As the process covers the paddle, the output responds proportionally by transmitting a 1-5mA or 4-20mA signal.


Click links for more information


Liquids & Slurries

Photos



Request a quote or information


Please fill out the fields that apply to your interest. After completing the form, click "Send" located under the Comments field. You will be returned to the General Information tab. To ensure your inquiry was sent, return to the Request a Quote tab and check for errors.

Send
* denotes mandatory field