Dynatrol Products - Level Detection, Viscosity & Density Measurement

Main » Liquid Level Switch » Product Details
  

Dynatrol® CL-10GH Liquid Level Switch


The Dynatrol® CL-10GH Liquid Level Detector and EC-501A(G) Control Unit is used for high, intermediate or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors.





Dynatrol® CL-10GH Liquid Level Switch


Advantages

Dynatrol® Liquid Level Detectors can be used on a wide range of liquids and slurries and can be mounted in any position on a vessel or in piping.  No packing gland, diaphragm, float, bearing, bellows or other troublesome pressure seal is used in the Dynatrol® Detector design. This unique design provides rugged construction yet a sensitive transmission of vibration energy through a rigid, all-welded pressure seal.  Corrosion resistant coatings are available if required for specific applications.  All components are constructed for long operating-life and require no field adjustments.

  

CL-10GH Specifications

 •  Explosion Proof: CSA NRTL/C approved for Class 1, Group D, Division 1 Class 2, Groups E, F, and G
 •  Pressure Rating: 3000 PSIG @ 100°F
 •  Temperature Rating: 300°F (High Temperature Construction Available)
 •  Pressure Connection: ¾-inch NPT
 •  Conduit Connection: ½-inch NPT
 •  Process Contact Surfaces: 316 S.S. (standard)


EC-501A(G) Control Unit Specifications

 •  Explosion Proof: CSA NRTL/C approved for Class 1, Group D; Class II, Group E, F & G; Class III
 •  Voltage Supply (Nominal): 120 volts -50-60 Hz
 •  Also Available in 240 VAC and 24 VDC
 •  Power Consumption: 5 VA
 •  Temperature Rating: 125°F Maximum
 •  Contacts: SPDT 2A @ 120 VAC (Non-Inductive)


Principle of Operation


The Dynatrol® liquid level paddle is driven into vibration by a driver coil. A second coil produces a voltage proportional to a 0-3/4-inch range of level. As the process covers the paddle, the output responds proportionally by transmitting a 1-5mA or 4-20mA signal.


Click links for more information


Liquids & Slurries
Beverage
Paint & Coatings
Brewing

Photos



Request a quote or information


Please fill out the fields that apply to your interest. After completing the form, click "Send" located under the Comments field. You will be returned to the General Information tab. To ensure your inquiry was sent, return to the Request a Quote tab and check for errors.

Send
* denotes mandatory field