Dynatrol Products - Level Detection, Viscosity & Density Measurement

Main » Solids Level Switch » Product Details
  

Dynatrol® GSS Level Sensor Switch for Extremely Lightweight Bulk Solids


The Dynatrol® CL-10GSS Level Detector may be used for high-, intermediate-, or low-point level detection of bulk solids. It is constructed to handle extremely light weight applications that are difficult to measure like glass fibers, glass wool, paper dust, polyester powders and polymer powders. The CL-10GSS is typically used with bulk solids in the density range of <5 lbs/ft3.





Dynatrol® GSS Level Sensor Switch for Extremely Lightweight Bulk Solids


Advantages

 •  Versatile:  This level detector operates successfully with consistent results on difficult product applications such as fine, low     
    density powders and materials as light as ½ pound per cubic foot.
 •  No Adjustment Needed:  All level switch components have been constructed for long operating life and require no field adjustments.
 •  Simple Installation:  Installation is made in the tank side through a 3/4-inch, half-coupling at the point of desired level detection.

CL-10GSS Specifications

 •  Explosion Proof: CSA NRTL/C approved for Class I, Groups C & D; Class II, Groups E, F & G; Class III
 •  Temperature Rating: 300°F (Consult Factory for higher ratings.)
 •  Pressure Rating: 1000 PSIG @ 100°F (Consult Factory for higher ratings.)
 •  Pressure Connection: 3/4-inch NPT
 •  Conduit Connection: 1/2-inch NPT


EC-501A(G) Control Unit Specifications

 

 •  Used with the Dynatrol® G Series Level Detectors for exceptional sensitivity in measurement.

 •  Explosion Proof: CSA NRTL/C approved for Class I, Groups C & D; Class II, Groups E, F & G; Class III
 •  Voltage Supply (Nominal): 120 volts-50/60 Hz
 •  Available in 24 VDC and 240 VAC
 •  Power Consumption: 5 VA
 •  Temperature Rating: 125°F Maximum
 •  Contacts: SPDT 2A @ 120 VAC (Non-Inductive)


Principle of Operation

The Dynatrol® GSS level detector consists of a paddle-style probe which is installed thorough the wall of the bin or duct at the point of desired level detection. When the probe is uncovered the paddle is free to vibrate and produce an output signal. This signal operates a relay indicating the paddle is uncovered and a low level exists. When the paddle is covered a dampening of the oscillation occurs. The resultant loss of signal de-energizes the relay indicating that a high level exists.

The On/Off signal from the Dynatrol® GSS level detector operates a SPDT relay in the EC-501A(G) Control Unit. The contacts of this relay can be used to actuate alarms, indicator lights or process control equipment.



Click links for more information


Extremely Lightweight Powders

Photos



Request a quote or information


Please fill out the fields that apply to your interest. After completing the form, click "Send" located under the Comments field. You will be returned to the General Information tab. To ensure your inquiry was sent, return to the Request a Quote tab and check for errors.

Send
* denotes mandatory field