free hit counters

Dynatrol® Measurement & Control Equipment Applications

Main
  Application results
Milling
Dynatrol® provides Bulk Solids for milling industry applications. Our point level detectors are used for measurement of high, intermediate, or low level detection of dry ingredients in bins, hoppers or feeders.
 


Ammonium Hydroxide
Dynatrol® Density Measurement Systems are used extensively for measurement and control of density, specific gravity, or percent concentration with Ammonia solution, also known as ammonium hydroxide, ammonia water, ammonical liquor, ammonia liquor, aqua ammonia, aqueous ammonia, or simply ammonia.
 


Beverage
Dynatrol® Liquid Level Switches are used in storage tanks or vessels at the point where level detection is needed. Dynatrol® Density Systems are commonly used on fructose and juice applications throughout the industry.
 


Boron (Nuclear)
Dynatrol® Density Systems are used to measure the concentration of Boron in nuclear power plants, as well as nuclear fuel manufacturing plants. Dynatrol® Systems have been used successfully in nuclear industries throughout the United States and are field proven.
 


Brewing
Dynatrol® Level Switches can be inserted into the storage tank or vessel at the point where the reading needs to be taken. Dynatrol® Density Systems are used in the brewing industry to measure various media.
 


Bulk Solids that Pack or Bridge
This level detector operates successfully with consistent results on difficult product applications like FLOUR, COCOA, SUGAR, PHARMACEUTICAL POWDERS, POWDERED LIME, FERTILIZER, FOOD SEASONINGS, PLASTIC POWDERS, PVC and PVA POWDER, STARCH, TALC, TiO2 POWDER and additional bulk solid materials.
 


Chemical
The Dynatrol® Density Systems and Viscosity Systems have been used successfully for many years to measure, test and control numerous chemical applications. Each process instrument is of rugged construction and available in various corrosion resistant materials.
 


Concrete Production
Concrete mixing facilities use Dynatrol® CL10-DJ Level Detectors to measure high, intermediate, or low levels of various media types in the concrete production process.
 


Ethylene Glycol
The Dynatrol® CL10-HY Density Cell and Series 2000 Digital Density Convertercan measure the temperature and density of an ethylene glycol process stream. Applications may include antifreeze and deicing fluid, also for use in manufacturing of resins and polyester fibers in the plastics industry, as well as removing water vapor during natural gas production.
 


Extremely Lightweight Powders
The Dynatrol® GSS Level Detector is designed for high, intermediate, or low-point level detection of bulk solids. It is constructed to handle extremely lightweight applications that are difficult to measure or detect. The CL-10GSS is versatile enough to operate successfully with consistent results on difficult product like fine, low density powders and materials as light as 1/2 lb. per cubic foot.
 


Feed & Grain
Dynatrol® provides Bulk Solids and Liquid Level Detection for feed and grain industry applications. Our point level detectors are used for measurement of high, intermediate, or low level detection of dry ingredients, liquids or slurries in bins, hoppers or feeders.
 


Fertilizer
Dynatrol® Density Measurement Systems are used extensively with ammonia solutions for measurement and control of density, specific gravity, or percent concentration. Dynatrol® Bulk Solid Level Switches are used on bins and hoppers for high, mid and low point detection.
 


Filled Asphalt
The CL-10DV series Asphalt Viscosity Meters are used to measure the viscosity of hot liquid asphalt. These viscometers are used in the roofing industry to measure the viscosity of asphalt filled with powdered limestone. Filled asphalt is primarily used to make roofing shingles.
 


Food Processing
Dynatrol® instruments are used in the Food Processing industry for Bulk Solids Level Detection of various substances, including those that can pack or bridge, as well as Liquid Level Detection and Density Measurement for various media

 


Heavy Granules & Pellets
Both the Type CL-10DJ and Type CL-10DJ-7 Dynatrol® Level Detectors are designed for application to either high, intermediate, or low point level detection of a wide range of bulk solid materials. Both product models are available in order to operate successfully in products ranging from low density flakes and powders to heavy granules and pellets. All level switch components have been constructed for long operating life and require no field adjustments.
 


Hydrochloric Acid
The Dynatrol® CL-10HY density cell and Series 2000 digital density converter can be used to measure hydrochloric acid.
 


Interface Level
Typical applications include WATER/CARBON, WATER/SAND, LIQUID/CATALYST INTERFACES and those that occur in steeping processes.
 


Liquid & Gas Density Systems
Dynatrol® Density Systems provide continuous, accurate analysis of process liquids or slurries in a variety of industries including foods, paper coatings, refined petroleum products, sugar and sulfuric acid. Digital read out allows you to display density as Specific Gravity, Grams/CC, °Brix, Baumé, API Gravity, Percent Solids, or Percent Concentration.
 


Liquids & Slurries
A unique vibrating principle permits design and operation features not available with other types of liquid level detectors. This detector may be mounted on a vessel or in piping, and easily detects the level of a wide range of liquids and slurries. Many excellent applications are found in the chemical, food and petrochemical industries.
 


Low Density Powders
The Dynatrol® Type CL-10GS Level Detector is designed for high, intermediate, or low-point level detection of bulk solids. It is constructed to handle lightweight media applications that are difficult to measure or detect. The GS Level Detector operates successfully with consistant results on difficult process applications such as fine, low density powders or fluff, flock, fumed silica, polyester and polymer powders.
 

Page 1 of 3 First  Previous  [1]  2  3  Next  Last